Wireless Mouse Not Working
Close-up of a wireless mouse and keyboard on a clean desk in a small accounting office, hand resting on the mouse

Wireless Mouse Not Working

A wireless mouse usually stops working because of weak batteries or a lost link to its USB receiver or Bluetooth. Switch the mouse off and on, put in fresh batteries, and plug the receiver straight into a USB port on the computer. In Windows 11, re-pair a Bluetooth mouse in Settings > Bluetooth & devices.

Try these quick fixes first

  1. Check that the mouse’s power switch is set to On and no plastic tab is left in the battery compartment.
  2. Put in fresh batteries, or charge a rechargeable mouse.
  3. Unplug the USB receiver, wait 10 seconds, and plug it into another port on the computer, not a hub or dock.
  4. Move the mouse closer to the receiver, with nothing in between.
  5. For a Bluetooth mouse, check that Bluetooth is on and Airplane mode is off.
  6. Try the mouse on another computer.

Check the power switch and batteries

A mouse with weak batteries, a switch set to Off or a packing tab still in place can’t send a signal to the computer.

  1. Turn the mouse over. If it has an On/Off switch, set it to On, and pull out any plastic tab left in the battery compartment.
  2. Put in fresh batteries, and make sure they’re inserted the right way and the contacts are clean. For a rechargeable mouse, connect its charging cable to a USB port or charger.
  3. Turn the mouse off, wait a few seconds, and turn it back on.
  4. If the mouse or its receiver has a Reset button, press it.

Reconnect the USB receiver

The receiver is the mouse’s link to the computer, and a hub, a dock or the computer’s own case can weaken its power or signal.

  1. Find the receiver. If it isn’t plugged in, check the box the mouse came in or a storage slot inside the mouse.
  2. Unplug the receiver, wait 10 seconds, and plug it into a different USB port directly on the computer. HP suggests a port on the opposite side.
  3. Don’t connect the receiver through a USB hub, dock or KVM switch. Logitech says it must plug directly into the computer.
  4. On a desktop, if the receiver is in a port on the back, move it to a front port, since the computer’s case can block the signal.
  5. Keep the receiver away from USB 3.0 devices such as external drives, which can interfere with it. USB 3.0 ports usually have a blue insert. Use a USB 2.0 port on the other side of the computer, or a USB extension cable that puts the receiver near the mouse.

Move closer and cut interference

Wireless mice use a short-range radio signal, so distance, metal and other wireless devices can weaken it until the mouse lags or stops.

  1. Keep the mouse within about 1 foot (30 cm) of the receiver, as HP suggests, with nothing in between.
  2. Move phones, speakers, cordless phones, wireless access points and other electrical devices away from the receiver. Logitech suggests at least 8 inches (20 cm).
  3. Turn off wireless devices you aren’t using, including Bluetooth devices.
  4. Don’t use the mouse on a metal surface. If the pointer moves badly, use a mouse pad rather than glass or a shiny desk.

Re-pair a Bluetooth mouse

Turning Bluetooth off and on, then removing the mouse and pairing it again, clears a Bluetooth connection that has stopped working.

  1. Select the Network, Sound or Battery icon next to the time on the taskbar. Check that Airplane mode is off and Bluetooth is on.
  2. Select Start > Settings > Bluetooth & devices, turn Bluetooth off, wait a few seconds, and turn it back on.
  3. Still not working? Go to Bluetooth & devices > Devices, select More options (…) next to the mouse, then Remove device > Yes.
  4. Put the mouse in pairing mode. This varies by model, so check its manual or the maker’s support site.
  5. Open the taskbar icons again, select the Manage Bluetooth devices arrow on the Bluetooth tile, choose the mouse under New devices, and select Done.
  6. If the mouse isn’t listed, go to Bluetooth & devices > Devices and, under Device settings, set Bluetooth devices discovery to Advanced.

Pair a Logitech mouse with its Unifying or Bolt receiver

Logitech now pairs mice to their receivers in its Logi Options+ app, and each mouse pairs only with its own type of receiver.

  1. Check the receiver. A Unifying receiver has an orange logo. Logi Bolt products can’t pair with a Unifying receiver, and Unifying products can’t pair with a Bolt receiver.
  2. Install Logi Options+ from Logitech’s support site. Logitech no longer supports its older Unifying Software and Connection Utility. On a work computer, ask your IT team before you install anything.
  3. For a Logi Bolt mouse, open Logi Options+, select Add Device, and choose Logi Bolt receiver. Press and hold the mouse’s connect button for three seconds, until its light blinks rapidly. Select Connect next to the mouse and follow the on-screen steps to verify it.
  4. For a Unifying mouse, turn the mouse on, open Logi Options+, select Add Device > Unifying Receiver, and follow the prompts until the app finds it.
  5. For other brands, follow the pairing steps in the mouse’s manual or on the maker’s support site.

Reinstall the mouse driver

Windows uses a driver to talk to the mouse and its receiver, and uninstalling a damaged one makes Windows install a fresh copy when it restarts.

  1. Save your work and close your apps. If the mouse is dead, use the laptop’s touchpad or a wired USB mouse for these steps.
  2. Right-click Start, select Device Manager, and expand Mice and other pointing devices.
  3. Right-click the entry for your mouse, often HID-compliant mouse, and select Uninstall device > Uninstall. This needs administrator rights. At work, ask your IT team.
  4. Right-click Start and select Shut down or sign out > Restart. Windows reinstalls the driver as it starts.
  5. If the mouse keeps dropping out, expand Human Interface Devices in Device Manager, open each USB Input Device, and on the Power Management tab clear Allow the computer to turn off this device to save power. This needs administrator rights. At work, ask your IT team.
  6. Select Start > Settings > Windows Update > Advanced options > Optional updates. If driver updates are listed, select them, choose Download and install, and restart.

Is it the mouse or the computer?

Trying the mouse on a second computer, and another mouse on this one, tells you whether to keep troubleshooting or replace the mouse.

  1. Connect the mouse to another computer with its receiver or over Bluetooth. If it doesn’t work there either, the mouse or its receiver is probably faulty.
  2. Connect a wired USB mouse or another wireless mouse to your computer. If it works, the problem is your original mouse.
  3. If no mouse works in any port, the computer needs attention. See our USB device not recognized guide.
  4. Replace a mouse that fails everywhere. Check its warranty first, and at work ask your IT team for a replacement.

Why does this happen?

  • Weak batteries, a switch set to Off, or a packing tab left in the battery compartment.
  • A receiver plugged into a hub, dock or KVM switch, or into a back port where the computer’s case blocks the signal.
  • Too much distance, a metal surface, or interference from phones, speakers, wireless access points and USB 3.0 devices.
  • A lost pairing, such as a Bluetooth connection that dropped or a Logitech mouse paired to a different receiver.
  • A damaged driver, or Windows turning off a USB device to save power.
  • A mouse or receiver that has failed.

When should you call IT?

  • The mouse fails on every computer and belongs to your company.
  • A fix needs administrator rights, or you need Logi Options+ or other software installed on a work computer.
  • Several people’s wireless mice or keyboards keep dropping out in the same area.
  • No mouse works in any USB port, or Bluetooth is missing from Settings.
  • The pointer moves or clicks things by itself, or you see a security warning.

OAC Technology’s IT support team fixes problems like this for businesses across the Twin Cities. Clients can call 952-548-5558, Monday to Friday, 8 a.m. to 6 p.m. Central. Not a client yet? Call the same number or send us a message.

Common questions

Why is my wireless mouse not working?

Usually because of weak batteries, a power switch set to Off, or a lost link to its receiver or Bluetooth. Put in fresh batteries, plug the receiver straight into the computer, and re-pair a Bluetooth mouse in Settings > Bluetooth & devices.

Why is my mouse not working with new batteries?

Check that the batteries face the right way, any plastic tab is out and the switch is on. Then unplug the receiver for 10 seconds and plug it into another port, or pair a Bluetooth mouse again. A mouse may also not track on glass or shiny surfaces.

How do I restart my wireless mouse?

Turn it off with its power switch, wait a few seconds, and turn it back on. Then unplug the USB receiver, wait about 10 seconds, and plug it back in.

Why is my Logitech wireless mouse not working?

Check the batteries, the switch, the receiver’s port and interference first. If it lost its pairing, pair it again in Logi Options+, and use a Bolt receiver for a Bolt mouse and a Unifying receiver for a Unifying mouse, since they can’t be mixed.

Why has my Bluetooth mouse suddenly stopped working?

Bluetooth may have been switched off, Airplane mode turned on, or the batteries run low. Turn Bluetooth off and back on in Settings > Bluetooth & devices, and if that doesn’t help, remove the mouse and pair it again.

Related guides

Author picture

OAC Technology

Author

Related Articles