USB Device Not Recognized
In Windows 11, “USB device not recognized” means Windows couldn’t identify a device you just plugged in, usually because of a poor connection, a hub or dock that can’t power it, or a driver problem. Unplug it, plug it straight into another USB port on the computer, and restart. If it still fails, reinstall it in Device Manager.
Try these quick fixes first
- Plug the device into a different USB port directly on the computer, not a hub, dock, monitor or keyboard.
- On a desktop, use a port on the back rather than the front.
- Try another cable. For a phone, use one that carries data, not just power.
- Plug in the device’s power adapter if it has one, and plug a laptop into its charger.
- Save your work and restart: Start > Power > Restart.
- Try the device on another computer to see whether the device or this computer has the problem.
Plug it straight into the computer
Hubs, docks and the ports on monitors and keyboards share the computer’s power and add extra connections, and some devices need more power than they can pass along.
- Disconnect other USB devices, such as hubs, flash drives, printers and cameras, but leave your mouse and keyboard connected.
- Plug the problem device into a USB port on the computer itself. On a desktop, use a port on the back, since those connect directly to the motherboard.
- For a Thunderbolt or USB4 device, use a port that supports it. Thunderbolt ports are usually marked with a lightning bolt.
- Swap in a cable you know works. A phone needs one that carries data, not just power.
- Plug in the device’s own power adapter if it has one, and run a laptop on its charger, since a low battery can limit USB power.
- If the device works now, the hub, dock or cable was the problem. If you need a hub, use one with its own power adapter.
Unplug it and restart
Windows can get stuck partway through setting up a new device, and a restart or a full power reset makes it start over.
- Unplug the device, save your work, and select Start > Power > Restart.
- When Windows is back, plug the device into a port on the computer and wait about 5 seconds before you use it.
- Still not recognized? Save your work, shut down the computer, unplug its power cord or charger, and unplug other USB devices. A desktop can keep its mouse, keyboard and monitor connected.
- Press and hold the power button for about 20 seconds. Plug the power back in, turn the computer on, and connect the device again.
Reinstall the device in Device Manager
Device Manager shows whether Windows can see the device at all, and uninstalling a failed entry makes Windows set the device up again from scratch.
- With the device plugged in, right-click Start and select Device Manager.
- Expand Universal Serial Bus controllers and Other devices, and look for an entry with a yellow warning sign. With this error it’s often named Unknown USB Device (Device Descriptor Request Failed).
- Right-click it, select Properties, and read Device status. Code 43 means Windows stopped the device because it reported a problem.
- Close the window, right-click the entry, and select Uninstall device > Uninstall. This needs administrator rights. At work, ask your IT team.
- Save your work, unplug the device, restart the computer, and plug the device back in. Windows installs it again.
- If there’s no entry for the device, select Action > Scan for hardware changes.
Reinstall the USB controllers
Damaged USB controller drivers can stop devices working in every port, and Windows reinstalls the controllers automatically when it restarts.
- Save your work, close your apps, and unplug USB devices except your mouse and keyboard.
- In Device Manager, expand Universal Serial Bus controllers.
- Right-click each entry in turn and select Uninstall device > Uninstall. This needs administrator rights. At work, ask your IT team.
- A USB mouse or keyboard may stop responding partway through. If it does, hold the power button until the computer turns off.
- Restart the computer, or turn it back on. Windows reinstalls the controllers as it starts.
Turn off USB selective suspend
Selective suspend lets Windows cut power to an idle USB port to save energy, and some devices don’t respond properly after it does.
- Select Start, type
edit power plan, and select Edit power plan. - Select Change advanced power settings, then expand USB settings > USB selective suspend setting.
- Set Plugged in to Disabled. On a laptop, set On battery to Disabled too. Select Apply > OK.
- Unplug the device, plug it back in, and test it.
- If USB settings isn’t listed, skip this fix. If turning it off didn’t help, set it back to Enabled, since it saves power. At work, your IT team may manage these settings.
Get driver updates from Windows Update
Fixes for USB controller and device drivers often come through Windows Update, and some are listed only as optional updates.
- Save your work, then select Start > Settings > Windows Update > Check for updates. Install what it finds and restart.
- Open Windows Update > Advanced options > Optional updates, choose any driver updates listed, and select Download and install. Restart when they finish.
- If the device came with its own software, such as a printer or scanner, install it from the maker’s website, then reconnect the device. On a work computer, ask your IT team first.
Using a dock or a front-panel port?
A dock adds its own power, cable and firmware between the device and the computer, and a desktop’s front ports connect through a cable inside the case.
- Plug the device straight into a port on the computer. If it works there, the dock or the front port is the problem.
- Make sure the dock’s power adapter is plugged in. Then unplug the dock from the computer and from power, plug the power back in, and reconnect the dock.
- Ask your IT team to update the dock’s firmware and the computer’s drivers from the computer maker’s support site.
- If a desktop’s back ports work but the front ones don’t, a cable inside the case may have come loose. Use the back ports and ask IT to check it.
- If nothing plugged into the dock works, see our docking station guide.
Is it the device or the port?
Trying the device somewhere else, and something else in the same port, shows which one has failed.
- Plug the device into another computer. If it isn’t recognized there either, the device or its cable has failed.
- Plug something you know works, such as a mouse, into the port that failed. If that fails too, the port is the problem.
- Shine a light into the port. Bent or broken pins, or a connector that wiggles, mean it needs repair.
- If you see dust or lint, shut down the computer and clean the port with short bursts of compressed air, holding the can upright. Don’t use liquids.
- If the failed device is a drive with files you need, don’t format it. Call IT.
Why does this happen?
Windows asks every USB device you plug in for its device descriptor, the basic details that identify it. If no usable answer comes back, Device Manager shows Unknown USB Device (Device Descriptor Request Failed). Common reasons:
- A loose, damaged or charge-only cable.
- A hub, dock, monitor or keyboard port that can’t supply enough power.
- A stuck or damaged driver for the device or the USB controllers.
- USB selective suspend cutting power to the port.
- A dirty or damaged port, or a loose cable behind a desktop’s front ports.
- A device that has failed.
When should you call IT?
- The device is a drive with files you need, and no computer recognizes it.
- No USB device works in any port, or several ports stopped working at once.
- A fix needs administrator rights, such as reinstalling drivers on a work computer.
- A port is loose or damaged, or a desktop’s front ports stopped working.
- Several people have the same problem with one dock or device model.
- You don’t know where the device came from, such as a flash drive you found. Don’t plug it in again.
If it’s a drive holding files you can’t lose, talk to our data recovery team before anyone formats or replaces it.
OAC Technology’s IT support team fixes problems like this for businesses across the Twin Cities. Clients can call 952-548-5558, Monday to Friday, 8 a.m. to 6 p.m. Central. Not a client yet? Call the same number or send us a message.
Common questions
What does “USB device not recognized” mean?
It means Windows detected something plugged in but couldn’t identify it or load a working driver for it. The cause is usually the cable, the port, power, a driver or a failed device.
Why does my computer keep saying USB device not recognized?
Usually a device or cable keeps dropping its connection. Unplug USB devices one at a time until the message stops, then try that device with another cable in a port on the computer. If it continues, turn off USB selective suspend.
How do I fix Unknown USB Device (Device Descriptor Request Failed)?
Plug the device into another port on the computer with a different cable, then uninstall its entry in Device Manager and restart. If it fails in every port and on another computer, the device or cable has failed.
How do I reset my USB ports?
Restart the computer first. If that doesn’t help, uninstall the entries under Universal Serial Bus controllers in Device Manager and restart, so Windows sets the ports up again. That needs administrator rights.
Why isn’t my phone recognized when I plug it in?
Use a cable that carries data, plug it straight into the computer, and unlock the phone. On an iPhone, tap Trust when asked. On an Android phone, tap the USB notification and choose File Transfer.









