No Internet Connection at the Office? What to Check, in Order
When the office has no internet connection, work through six checks in this order: look for a provider outage from your phone, check the cables and equipment lights, restart the modem and then the router or firewall, see whether one device or everyone is offline, check the firewall and how it hands out addresses (DHCP), and finally reset the network settings on the affected computer. Working from the outside in, each check either finds the problem or tells you whether to wait for the provider or call for IT help.
Two cautions. Restarting the modem or firewall cuts off everyone, including internet-based phones and video calls, so if coworkers are online and only your computer is not, skip to step 4. And leave the small recessed reset button alone: on many devices it restores factory settings and erases the office’s configuration.
How do I fix no internet connection at work?
Go in order, and stop as soon as the connection comes back.
1. Check for a provider outage from your phone
Turn off Wi-Fi on your phone so it uses cellular data, then check your internet provider’s outage page or app. If you call the provider, use a cell phone: office phones that run over the internet will be down too.
If there is an outage at your address, nothing inside the office will fix it. Ask when service should return, and decide whether people should work from home or from a phone hotspot in the meantime.
2. Check the cables and the lights
Find the modem (the box the provider installed), the router or firewall plugged into it, and the network switch. Then check:
- Power: a switched-off power strip, a loose cord, or a battery backup that is beeping or off.
- Connections: the modem’s cable should be firmly seated in the Internet or WAN port of the router or firewall.
- Lights: on many modems, a steady Online or Internet light means the provider’s signal is arriving, blinking means the modem is still trying, and off or red means no signal. Colors vary by model.
- A single desk: the network cable at the computer, the docking station and the wall jack.
Photograph the cabling before you unplug anything, so it all goes back the same way.
3. Restart the modem, then the router or firewall
Tell the office first, then:
- Unplug the router or firewall, then the modem. Modems that also carry phone service sometimes have a backup battery and stay on; remove the battery too.
- Wait at least 30 seconds.
- Plug in the modem and wait until its lights stop blinking and the online light is steady. Comcast Business’s restart instructions allow two minutes for this; if the lights are still changing, keep waiting.
- Plug in the router or firewall. The same instructions allow another two minutes, and a business firewall can take several minutes to start.
- Restart one computer, or turn its Wi-Fi off and on, and test.
The order matters: if the router starts before the modem is ready, it can come up without an internet connection and need a second restart. Microsoft’s guide to fixing Wi-Fi connection issues gives the same sequence.
4. Check whether it is one device or everyone
Ask a coworker, try a second computer, and try a phone on the office Wi-Fi:
- Everyone is offline, wired and wireless: the provider, the modem or the firewall. Go to step 5.
- Wired computers work but Wi-Fi does not: the wireless access points or the Wi-Fi settings, usually a call to IT.
- One room or area is offline: a network switch or its cabling, also a call to IT.
- One device is offline and everyone else is fine: that device. Go to step 6.
- Everything connects but crawls or keeps dropping: a different problem, covered in our article Why Is Our Internet Slow?
5. Check the firewall and its address assignments (DHCP)
Every device needs an address from the network to reach the internet. In a typical office the firewall or router hands these out through a service called DHCP; in some offices a Windows server does. If that service stops or runs out of addresses, devices look connected but reach nothing.
The quick test: an IP address starting with 169.254 means the device gave itself one because nothing answered its request.
- Windows 11: Settings > Network & internet > Wi-Fi (or Ethernet), select your network, and read the IPv4 address. Or type ipconfig in Command Prompt.
- Mac: System Settings > Network, select the connection, then click Details > TCP/IP.
If you manage the firewall, sign in to it and check that the internet (WAN) connection has an outside address, that DHCP is running with addresses to spare, and whether it has logged alerts. If addresses look normal but no website opens, suspect DNS, the service that turns names into addresses. If you do not manage the firewall, stop here and call your IT support: it holds the rules and settings for the whole office, and a wrong change there affects everyone.
6. Reset the network settings on the affected device
If only one computer is offline, check airplane mode, the Wi-Fi switch or key, a VPN stuck connecting, and whether it joined the guest network, then restart it fully. If that fails:
- Windows 11: open the Get Help app and run the Network and Internet troubleshooter. Next, open Command Prompt as administrator and run netsh winsock reset, netsh int ip reset, ipconfig /release, ipconfig /renew and ipconfig /flushdns, in that order, restarting if Windows asks you to. The last resort is Settings > Network & internet > Advanced network settings > Network reset > Reset now. It restarts the computer and reinstalls its network adapters; on a company computer, ask IT first, since VPN software may need reinstalling.
- Mac: turn Wi-Fi off and on from Control Center or the menu bar, then go to System Settings > Network, select the connection, and click Details > TCP/IP > Renew DHCP Lease. Also check the date and time, and any VPN or security software. For Apple’s own analysis, hold the Option key, click Wi-Fi in the menu bar, and choose Open Wireless Diagnostics.
Microsoft’s guide above and Apple’s article If your Mac isn’t connecting to the internet over Wi-Fi cover these steps in more detail.
Is it the internet provider or your own equipment?
It is usually the provider when an outage is reported at your address, when the modem’s online light stays off or blinking after a restart, or when the firewall shows no outside address even though nothing in the office has changed. Call the provider’s business support line with your account number and service address; the provider can usually test the line to your modem remotely. Ask for a ticket number.
It is usually your own equipment when the modem is online but the office is not, when devices get 169.254 addresses, when only Wi-Fi or one area is down, or when restarts fix things only for a while. Equipment that keeps needing restarts may be overheating, overloaded or failing, and is worth having checked before it stops for good.
| What you see | Likely cause | Who fixes it |
|---|---|---|
| Outage reported at your address | Provider outage | The provider; wait, or switch to a backup connection |
| Modem’s online light off or blinking after a restart | Provider line or modem | The provider |
| Modem online, but nobody in the office can connect | Firewall or router, or the cable between them | Your IT support |
| Devices show a 169.254 address | DHCP on the firewall, router or server | Your IT support |
| Wired works, Wi-Fi does not | Wireless access points or Wi-Fi settings | Your IT support |
| One computer offline, everyone else fine | That computer’s settings, adapter, cable or dock | You (step 6), then your IT support |
| Connected but slow, or dropping every so often | Bandwidth, failing equipment or line quality | Your IT support and the provider together |
When should you call for help?
Call the provider when the outage check or the modem lights point to them. Call your IT support when:
- the modem is online but the office is not;
- the next step means signing in to the firewall;
- devices are getting 169.254 addresses;
- a network reset did not fix a single computer;
- the problem keeps coming back after restarts.
Whoever you call, have this ready: which devices and areas are affected, when it started, what the modem and firewall lights show, which steps you have tried, and whether the phones are down too.
If you are an OAC Technology client, call us. Coordination with your internet provider is part of our flat-rate managed IT, so one call covers both sides of the problem. If you are not a client, our IT support team can still help, and hourly work is quoted per hour.
How can a business avoid the next outage?
No office can stop a construction crew from cutting a line down the street, but it can limit the damage.
- A second internet connection with automatic failover. For offices that cannot be offline, this is worth asking about: the firewall switches to the backup line automatically when the main one drops. The backup should use a different provider or technology, such as cellular, so one problem cannot take out both.
- Monitored network equipment. With monitoring, someone is alerted when the connection drops, at any hour, not when the first person arrives in the morning. OAC’s flat-rate managed IT includes 24/7 monitoring of network equipment and covers a firewall for $25 a month; see our network support page and our published rates on the managed IT cost page.
- Battery backup for the network gear. A small UPS on the modem, firewall and switch carries them through brief power flickers that would otherwise restart them.
- Labels. Label the equipment and post the provider’s support number and your account number beside it, so anyone in the office can follow this list.
- Supported equipment. Replace routers and firewalls before the manufacturer stops providing security updates for them. The last question below explains why.
Common questions
Why does it say connected to Wi-Fi but no internet?
Because those are two different connections. “Connected” means the device has a working link to the office’s wireless access point; “no internet” means something beyond that link is not working. Windows shows this as “No internet, secured.” Common causes are a provider outage, a modem or firewall that is down, a device that did not get a proper address (one starting with 169.254), DNS that is not answering, or a guest network with a sign-in page you have not completed.
Should I restart the modem or the router first?
The modem. Turn both off, start the modem, and wait until its online light is steady, usually a couple of minutes. Then start the router or firewall. If the router starts first, it can come up without an internet connection and need a second restart.
When should an office replace its router or firewall?
When the manufacturer stops providing security updates for it, when it cannot keep up with the internet speed you pay for, or when it needs regular restarts to keep working. The first reason is the one that matters for security. In February 2026, the Cybersecurity and Infrastructure Security Agency (CISA) issued Binding Operational Directive 26-02, ordering federal civilian agencies to remove end-of-support firewalls, routers and other edge devices and citing widespread exploitation campaigns by advanced threat actors targeting them. The directive does not apply to private businesses, but its reasoning does.
Still offline?
Call OAC Technology at 952-548-5558, Monday to Friday, 8 a.m. to 6 p.m. Central, or contact us. If you would rather talk about preventing the next outage, the first conversation is free, usually about half an hour, and there is no long-term contract.









