GlobalProtect VPN Not Connecting
A red-haired woman in her thirties connecting to work from a home office in the evening, laptop and second monitor, warm lamp light

GlobalProtect VPN Not Connecting

Palo Alto Networks GlobalProtect usually won’t connect because your computer has no working internet, a hotel or guest Wi-Fi sign-in page is waiting, or the sign-in or MFA prompt didn’t finish. Check that websites load, sign in to the Wi-Fi first, then open GlobalProtect, select Refresh Connection from its menu and approve the sign-in request.

Try these quick fixes first

  1. Open a public website. If nothing loads, fix the internet connection before the VPN.
  2. On hotel, airport or guest Wi-Fi, open your browser and finish the network’s sign-in page.
  3. Look for a sign-in window or an MFA request on your phone, and approve it.
  4. Open the GlobalProtect menu and select Refresh Connection.
  5. Make sure the portal address matches the one your IT team gave you.
  6. Check that your computer’s date, time and time zone are correct.
  7. Save your work and restart the computer.

Make sure your internet works first

GlobalProtect reaches your company over the internet, so it can’t connect until your computer is online.

  1. Open a public website. If it loads, your internet works, so move on to the next fixes.
  2. If nothing loads, fix the connection first. See Laptop Won’t Connect to Wi-Fi, or No Wi-Fi Networks Showing in Windows 11 if no networks appear.
  3. If your home internet is down, try another connection, such as your phone’s hotspot.
  4. At the office, the GlobalProtect icon may show a house and Internal Network when you hover over it. That’s normal on the company network.

Sign in to hotel or guest Wi-Fi first

Hotel, airport and guest networks often hold back the internet until you accept terms on a sign-in page, and Palo Alto Networks says GlobalProtect detects these pages.

  1. Open your browser and go to any website so the network’s sign-in page appears. GlobalProtect may open the page in its own window instead, and a Mac may show its own sign-in window.
  2. Accept the terms, or enter the room number or access code the venue gave you.
  3. If you closed GlobalProtect’s sign-in window, select Connect in GlobalProtect to open it again.
  4. Then open the GlobalProtect menu and select Refresh Connection so it checks the network again.
  5. Some companies block all internet until GlobalProtect connects and allow a set time to sign in. If you’re locked out, Palo Alto Networks says to reconnect to the Wi-Fi, restart the computer or select Refresh Connection.
  6. Never enter your work password on a Wi-Fi sign-in page. Read about public Wi-Fi risks.

Check the portal address

GlobalProtect connects to your company’s portal first, and Palo Alto Networks says to enter the portal address your administrator provided.

  1. Select the GlobalProtect icon at the right end of the taskbar on Windows, or in the menu bar on a Mac. On Windows, if you don’t see it, select the up arrow to show hidden icons.
  2. The first time, select Get Started, enter the portal address exactly as IT gave it, and select Connect.
  3. If more than one portal is saved, choose the right one from the Change Portal list.
  4. To see saved portals, open the menu (three lines), select Settings and open the Connections tab.
  5. If you can’t change the portal field, your company locked it. Use only an address from IT, never one from an unexpected email.

Finish the sign-in and MFA prompt

Your company may ask for your work sign-in and a second step, such as approving a notification on your phone, before GlobalProtect connects.

  1. If GlobalProtect asks, enter your Username and Password and select Sign In.
  2. If your company uses a sign-in page, it opens inside GlobalProtect or in your web browser, depending on how IT set it up. Finish it there. If it fails inside GlobalProtect, Palo Alto Networks says the error appears in that window, so read it before you close it.
  3. Approve the request on your phone, or type the one-time code it shows.
  4. If you changed your password recently, open the menu, select Settings, select Sign Out to clear the saved password, and connect again with the new one.
  5. If your company uses Microsoft Authenticator and approvals never arrive, see Microsoft Authenticator Not Working.

Refresh the connection and check its status

Refresh Connection makes GlobalProtect try again, and the app’s own status shows whether it connected and where.

  1. Open GlobalProtect, select the menu (three lines) and select Refresh Connection.
  2. If the menu also shows Rediscover Network, try it. Palo Alto Networks says it lets you check the portal for new settings.
  3. Hover over the icon to read the status: Not Connected (gray), Connected (shield) or Internal Network (house).
  4. For details, open the menu, select Settings and open the Connections tab. It lists your portal and gateway. If IT turned on the advanced view, it also shows the gateway’s address, location and connection time.
  5. If your company lets you pick a gateway, choose another from Change Gateway. The default is Best Available.

Check your computer’s date and time

Palo Alto Networks says the connection fails if certificates are invalid or expired, and a wrong clock can make a valid certificate look expired.

  1. On Windows 11, select Start > Settings > Time & language > Date & time.
  2. Turn on Set time automatically and Set time zone automatically. If they’re grayed out or Windows asks for a password, this needs administrator rights. At work, ask your IT team.
  3. On a Mac, open System Settings > General > Date & Time and turn on Set time and date automatically.
  4. Then connect GlobalProtect again.

Collect logs for your IT team

GlobalProtect’s logs show IT where the connection failed, so gather them before you call.

  1. Write down when it failed, which network you were on and the exact message GlobalProtect showed.
  2. If the menu shows Report an Issue (app version 6.3 or later, when your company turns it on), select it, check Run Diagnostic Tests and Include Diagnostic Logs, select Continue, then Close. The report goes to your company’s administrator.
  3. Otherwise, open the menu, select Settings, open the Troubleshooting tab and select Collect Logs. Then ask IT how to send them.
  4. Don’t uninstall or reinstall GlobalProtect. Palo Alto Networks says only users with administrator rights can uninstall it.
  5. Don’t use Windows’ Network reset to fix the VPN. Microsoft warns that you might need to reinstall VPN software afterward.

Is the problem on your company’s side?

Some failures start at the company’s firewall, portal, gateway or sign-in service, and only IT can fix those.

  1. Ask a coworker who works remotely whether GlobalProtect connects for them.
  2. Try a different internet connection. If it fails on every network, the problem probably isn’t your Wi-Fi.
  3. If GlobalProtect shows a certificate warning, don’t accept it. Call IT. The portal or gateway certificate may have expired, and the administrator has to replace it.
  4. Your company may check your computer’s security status, such as its security updates, antivirus and disk encryption, before it allows access. Palo Alto Networks calls this a host information profile (HIP). IT can tell you what to fix.

Why does this happen?

  • The computer isn’t online, or a Wi-Fi sign-in page is waiting.
  • The portal address is wrong or missing.
  • The sign-in or MFA step didn’t finish, or GlobalProtect saved an old password.
  • The computer’s clock is wrong, so certificates look invalid.
  • The computer doesn’t pass the company’s security (HIP) check.
  • The company’s firewall, portal, gateway, certificates or sign-in service have a problem.

When should you call IT?

  • Coworkers can’t connect either, or GlobalProtect fails on every network you try.
  • GlobalProtect shows a certificate warning.
  • Your password expired, your account is locked or MFA approvals never arrive.
  • On a Mac, macOS says a GlobalProtect system extension was blocked. Palo Alto Networks says only administrators can allow it.
  • GlobalProtect needs to be reinstalled or updated.
  • The VPN connects, but company systems or Remote Desktop still won’t open.

If remote access problems affect your whole team, see our network security services.

OAC Technology’s IT support team fixes problems like this for businesses across the Twin Cities. Clients can call 952-548-5558, Monday to Friday, 8 a.m. to 6 p.m. Central. Not a client yet? Call the same number or send us a message.

Common questions

Why is my GlobalProtect not connecting?

Usually because the computer isn’t online, a hotel or guest Wi-Fi sign-in page is waiting, or the sign-in didn’t finish. Fix the internet first, then select Refresh Connection from the GlobalProtect menu. If coworkers can’t connect either, call IT.

Why doesn’t GlobalProtect connect when I click Connect?

Because it can’t finish until you’re online and signed in. Look for a sign-in window or an MFA request on your phone, check the portal address, then select Refresh Connection from the menu.

Is GlobalProtect VPN having issues?

If several coworkers can’t connect at once, yes, and the problem is on your company’s side, because GlobalProtect connects to the portal and gateways your company set up. Call IT and tell them when it started.

Why is GlobalProtect not connecting on a Mac?

Mostly for the same reasons as on Windows: the internet, the portal address, sign-in and the clock. Also check whether macOS blocked GlobalProtect’s system extension. Only an administrator can allow it, so at work, call IT.

Related guides

Author picture

OAC Technology

Author

Related Articles